As Silver offers better current dispersion than Carbon. The Silver film in these electrodes makes them more comfortable to use.
Full carbon and silver grid (inlay) designs also available.
Save when you buy in bags of 10 (40 electrodes) or cases of 40 packs (160 electrodes)
Instructions for application of electrodes
1- Apply electrode only to unbroken skin. Clean electrode application area with soap and water, rinse and dry.
2- With electrode still on liner, connect lead wire from stimulation device to electrode connector.
3- Remove electrode from liner by grasping edge and peeling it off the liner. Retain liner for storage.
4- Place the electrode on the exact skin location (should be determined by a medical professional) by applying the center of the electrode first and smoothing down to the electrode edge.
Removal of electrodes
1- Remove electrode from skin by peeling from its edge.
2- Replace electrode on liner and return to re-sealable packaging.
Re-application and storage of electrode
1- If the electrode gel appears dry, add a few drops of water to the gel. Let rest to tacky stage, then apply to skin.
2- Between uses return the electrode to liner and store in the re-sealable bag in a cool place out of direct sunlight. 417F-807F (57C-277C)
Warning – These electrodes are used for a single patient only. If skin irritation develops, discontinue use and consult a physician. Electrodes should not be placed in any location where a current will be applied to head or neck. Patients with a pacemaker or any other metallic/electric implants should consult a physician before using.