StimTec 2 inch square Carbon Electrodes

Description

Square – 2” (5 cm), 4 per package

Save when you buy in bags of 10 (40 electrodes) or cases of 40 packs (160 electrodes)

Formally called StimTec Essential Electrodes

Instructions for application of electrodes

1- Apply electrode only to unbroken skin. Clean electrode application area with soap and water, rinse and dry.

2- With electrode still on liner, connect lead wire from stimulation device to electrode connector.

3- Remove electrode from liner by grasping edge and peeling it off the liner. Retain liner for storage. 

4- Place the electrode on the exact skin location (should be determined by a medical professional) by applying the center of the electrode first and smoothing down to the electrode edge.

Removal of electrodes

1- Remove electrode from skin by peeling from its edge.

2- Replace electrode on liner and return to re-sealable packaging.

Re-application and storage of electrode

1- If the electrode gel appears dry, add a few drops of water to the gel. Let rest to tacky stage, then apply to skin.

2- Between uses return the electrode to liner and store in the re-sealable bag in a cool place out of direct sunlight. 417F-807F (57C-277C)

Warning – These electrodes are used for a single patient only. If skin irritation develops, discontinue use and consult a physician. Electrodes should not be placed in any location where a current will be applied to head or neck. Patients with a pacemaker or any other metallic/electric implants should consult a physician before using.